Engine - GM (19435442)

GMMPN19435442
Sale Price$13,856.71
Save$3,093.3918.2% off
MSRP $16,950.10
Description :

THE CLASSIC 350 SMALL-BLOCK WITH MODERN FEATURES
As part of Chevrolet Performance's new line of Street Performance engines, the SP350 offers contemporary engine features on the classic Small-Block architecture, for a unique blend of the low-rpm torque 350 engines have always been known for, and is also higher-rpm performance comparable.
The SP350's unique capability lies in its lightweight aluminum cylinder heads, which feature a valvetrain with beehivestyle valve springs, similar to the design of the high-revving LS engine family. They enable greater high-rpm performance and durability, allowing the engine to rev higher and maximize the airflow capability of the heads - all without sacrificing the 350's signature torque.
Our SP350 Turn-Key package comes complete with the distributor and balancer installed. The carburetor, starter, fuel pump air conditioning pump, alternator, Front-End Accessory Drive Kit and more are also included, ready to bolt on.
TECH SPECS
Part Number: 19333158
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 350
Bore x Stroke (in): 4.000 x 3.480
Block (P/N 10243870): Cast-iron with 4-bolt main caps
Crankshaft (P/N 12670965): Forged steel (shot peened)
Connecting Rods (P/N 10108688): Powdered metal
Pistons (P/N 10159436): Hypereutectic aluminum
Camshaft Type (P/N 10185071): Hydraulic roller
Camshaft Lift (in): .474 intake / .510 exhaust
Camshaft Duration (@.050 in): 208° intake / 221° exhaust
Cylinder Heads (P/N 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (in): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.6:1 nominal
Rocker Arms (P/N 10089648): Stamped steel
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Ignition Timing: 36? Total @ 4,000 rpm
Maximum Recommended rpm: 5,800
Balanced: External
Flexplate (P/N 14088765): 12.750"
Intake Manifold (P/N 12366573): Dual Plane
INSTALLATION NOTES

  • SP350 Base Engine, P/N 19333157 is also available
  • Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
  • Requires fuel line from fuel pump to carburetor
  • Designed for pre-1976 street vehicles or any off-road vehicle
  • Some assembly and minor engine tuning required
  • Not intended for marine applications
NOTE: Distributor with melonized steel gear MUST be used with long-blocks and Partial engines with steel camshafts, or engine damage will occur.

My Location
  • Min. 12 Months
  • Safe, Secure Checkout

Product Details

Description

THE CLASSIC 350 SMALL-BLOCK WITH MODERN FEATURES
As part of Chevrolet Performance's new line of Street Performance engines, the SP350 offers contemporary engine features on the classic Small-Block architecture, for a unique blend of the low-rpm torque 350 engines have always been known for, and is also higher-rpm performance comparable.
The SP350's unique capability lies in its lightweight aluminum cylinder heads, which feature a valvetrain with beehivestyle valve springs, similar to the design of the high-revving LS engine family. They enable greater high-rpm performance and durability, allowing the engine to rev higher and maximize the airflow capability of the heads - all without sacrificing the 350's signature torque.
Our SP350 Turn-Key package comes complete with the distributor and balancer installed. The carburetor, starter, fuel pump air conditioning pump, alternator, Front-End Accessory Drive Kit and more are also included, ready to bolt on.
TECH SPECS
Part Number: 19333158
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 350
Bore x Stroke (in): 4.000 x 3.480
Block (P/N 10243870): Cast-iron with 4-bolt main caps
Crankshaft (P/N 12670965): Forged steel (shot peened)
Connecting Rods (P/N 10108688): Powdered metal
Pistons (P/N 10159436): Hypereutectic aluminum
Camshaft Type (P/N 10185071): Hydraulic roller
Camshaft Lift (in): .474 intake / .510 exhaust
Camshaft Duration (@.050 in): 208° intake / 221° exhaust
Cylinder Heads (P/N 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (in): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.6:1 nominal
Rocker Arms (P/N 10089648): Stamped steel
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Ignition Timing: 36? Total @ 4,000 rpm
Maximum Recommended rpm: 5,800
Balanced: External
Flexplate (P/N 14088765): 12.750"
Intake Manifold (P/N 12366573): Dual Plane
INSTALLATION NOTES

  • SP350 Base Engine, P/N 19333157 is also available
  • Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
  • Requires fuel line from fuel pump to carburetor
  • Designed for pre-1976 street vehicles or any off-road vehicle
  • Some assembly and minor engine tuning required
  • Not intended for marine applications
NOTE: Distributor with melonized steel gear MUST be used with long-blocks and Partial engines with steel camshafts, or engine damage will occur.


Part Number (MPN)
19435442
Brand
SKU
19435442
Superseded Part Number(s)
19333158, 19355667, 19417623, 19418137, 19418997, 19432102, 19433040

YearMakeModelBody & TrimEngine & Transmission
Vehicle #1
Year
Make
Model
Body & Trim
Engine & Transmission

Shipping Policy

  • In stock orders ship within 24 hours.
  • Weekend orders will be processed the next business day.
  • If a part is not in stock and must be ordered from the manufacturer, it usually takes 2-3 days to arrive to us and will be promptly shipped to you. Most of the orders are shipped complete within 2-3 business days. A few of the parts ordered from the manufacturer may take up to 5-6 business days to arrive and will shipped to you immediately.
  • Depending upon location, ground shipments usually take 2-7 days.
  • Your order may be shipped Overnight for an additional cost.
  • Oversized shipments will be additional; you will be contacted prior to shipping for approval.
  • We cannot guarantee transit times for ground and oversize orders.
  • Shipping Carrier substitutions may be made at our determination in an attempt to reduce shipping cost to the customer.
  • We do not ship internationally.
  • In the unlikely event that a part has been placed on backorder or discontinued, we will do our best to try and find one for you as quickly as possible.
  • We do not ship COD orders.
Check out our Shipping Policy for more details.

Return Policy

  • Contact us to arrange for any returns.
  • A copy of the invoice will need to be included with the return.
  • There is a 20% restocking fee charged against all returned parts.
  • Parts must be resaleable and in the original packaging.
  • We cannot take back used parts.
  • We cannot take back installed or tried parts.
  • Electrical parts are not returnable.
  • We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria.
  • Return request need to be within 30 days of receipt.

Cancellation Policy

  • An order or a portion of an order may be cancelled up until the time it is shipped and no longer in our possession.
  • If the cancelled part was special ordered from the manufacturer a return fee of 15% may apply.
Check out our Return Policy for more details.